Home

Contact

Links

Publications

People

PEER-REVIEWED JOURNAL PUBLICATIONS

Technical journal papers:

1.       Kilic, Z.M., Priest, J., Ayvar-Soberanis, S., and Hinduja, S., (in press). A novel multi-harmonic and phase-independent estimation of cutting force coefficients. CIRP Annals – Manufacturing Technology. https://doi.org/10.1016/j.cirp.2025.04.021

2.       Alhijaily, A., Kilic, Z.M., and Bartolo, P. 2024. Development of a novel gantry system for cooperative printing of plastic materials. Virtual and Physical Prototyping 19 (1), e2305208. https://doi.org/10.1080/17452759.2024.2305208

3.       Priest, J., Ayvar-Soberanis, S., Dominguez-Caballero, J., Onawumi, P., Kilic, Z.M., Curtis, D., 2024. Assessment of cutting force coefficient identification methods and force models for variable pitch and helix bull-nose tools. CIRP Journal of Manufacturing Science and Technology, 55, 210-223. https://doi.org/10.1016/j.cirpj.2024.09.010

4.       Lorain, R., Kilic, Z.M., Valiorgue, F., Rech, J., and Altintas, Y., 2024. Identification of dynamic coefficient matrix for drilling process simulations from measured tool geometry, axial force and torque. CIRP Journal of Manufacturing Science and Technology, 52, pp.159-174. https://doi.org/10.1016/j.cirpj.2024.05.018

5.       Alhijaily, A., Alqarni, A., Kilic, Z.M. and Bartolo, P., 2024. Development of a mobile 3D printer and comparative evaluation against traditional gantry systems. Journal of Intelligent Manufacturing, pp.1-18. https://doi.org/10.1007/s10845-024-02433-z

6.       Griskevicius, M., Kharka, V., and Kilic, Z.M., 2024. Chatter Mitigation in Turning Slender Components Using Viscous Fluids. J. Manuf. Mater. Process., 8, 128. https://doi.org/10.3390/jmmp8040128 (This article belongs to the Special Issue Advances in Machining of Difficult-to-Cut Materials)

7.       Alhijaily, A., Kilic, Z.M., Bartolo, P., 2023.“Online Cooperative Printing by Mobile Robots”, Virtual and Physical Prototyping, 18:1, https://doi.org/10.1080/17452759.2023.2276257

8.       Ye, C., Yang, J., Kilic, Z.M.. Chen, D., and Ding, H., 2023.“Experimental Modal Transferring of Industrial Robot with Data Augmentation through Domain Adaptation and Transfer Boosting”, Mechanical Systems Signal Processing, 200, p.110547. https://doi.org/10.1016/j.ymssp.2023.110547

9.       Bari, P., Kilic, Z.M., and Law, M., 2023.“Rapid Stability Analysis of Variable Pitch and Helix End Mills using a Non-iterative Multi-frequency Solution”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 237(13), pp.2109-2118. https://doi.org/10.1177/09544054221126967   

10.   Zhang, T., Fang, G., Huang, Y., Dutta, N., Lefebvre, S., Kilic, Z.M., and Wang, C.C.L., 2022.“S3-Slicer: A General Slicing Framework for Multi-Axis 3D Printing”, ACM Transactions on Graphics (TOG), 41(6), pp.1-15. https://doi.org/10.1145/3550454.3555516  (Received SIGGRAPH Asia 2022 Technical Papers’ Best Paper Award.)

11.   Liu, Y.-P., Kilic, Z.M., and Altintas, Y., 2022.“Monitoring of In-Process Force Coefficients and Tool Wear”, CIRP Journal of Manufacturing Science and Technology, 38, pp.105—119. https://doi.org/10.1016/j.cirpj.2022.04.009

12.   Fu, R., Curley, P., Higgins, C., Kilic, Z.M., Sun, D., Murphy, A. and Jin, Y., 2022.“Double-sided Milling of Thin-walled Parts by Dual Collaborative Parallel Kinematic Machines.”, Journal of Materials Processing Technology, 299, p.117395. https://doi.org/10.1016/j.jmatprotec.2021.117395

13.   Bari, P., Kilic, Z.M., Law, M. and Wahi, P., 2021.“Rapid Stability Analysis of Serrated End Mills using Graphical-frequency Domain Methods”, International Journal of Machine Tools and Manufacture, 171, p.103805. https://doi.org/10.1016/j.ijmachtools.2021.103805

14.   Habibi, M., Kilic, Z.M., and Altintas, Y., 2021.”Minimizing Flute Engagement to Adjust Tool Orientation for Reducing Surface Errors in Five-Axis Ball End Milling Operations”, ASME Journal of Manufacturing Science and Engineering, 143(2), p.021009. https://doi.org/10.1115/1.4048267

15.   Li, J., Kilic, Z.M., and Altintas, Y. 2020.”General Cutting Dynamics Model for Five-Axis Ball-End Milling Operations”, ASME Journal of Manufacturing Science and Engineering, 142(12), p.121003. https://doi.org/10.1115/1.4047625

16.   Altintas, Y., Yang, J., Kilic, Z.M., 2019.“Virtual Prediction and Constraint of Contour Errors Induced by Cutting Force Disturbances on Multi-axis CNC Machine Tools”, CIRP Annals – Manufacturing Technology, 68(1), pp.377-380. https://doi.org/10.1016/j.cirp.2019.04.019

17.   Caliskan, H., Kilic, Z.M., Altintas, Y., 2019.“On-line Energy Based Milling Chatter Detection”, ASME Journal of Manufacturing Science and Engineering, 140(11), p.111012. https://doi.org/10.1115/1.4040617

18.   Ozturk, O.M., Kilic, Z.M., Altintas, Y., 2018.“Mechanics and Dynamics of Orbital Drilling”, International Journal of Machine Tools and Manufacture, 129, pp.37-47. https://doi.org/10.1016/j.ijmachtools.2018.03.001

19.   Kilic, Z.M., Altintas, Y., 2016.“Generalized Modeling of Cutting Tool Geometries for Unified Process Simulation”, International Journal of Machine Tools and Manufacture, 104, pp.14-25. https://doi.org/10.1016/j.ijmachtools.2016.01.007 (Selected as Key Scientific Article.)

20.   Kilic, Z.M., Altintas, Y., 2016.“Generalized Mechanics and Dynamics of Metal Cutting Operations for Unified Simulations”, International Journal of Machine Tools and Manufacture, 104, pp.1-13. https://doi.org/10.1016/j.ijmachtools.2016.01.006

21.   Wan, M., Kilic, Z.M., Altintas, Y., 2015.“Mechanics and Dynamics of Multifunctional Tools”, ASME Journal of Manufacturing Science and Engineering, 137(1), p.011019. https://doi.org/10.1115/1.4028749  

22.   Altintas, Y., Kilic, Z.M., 2013.“Generalized Dynamic Model of Metal Cutting Operations”, CIRP Annals – Manufacturing Technology, 62(1), pp.47-50. https://doi.org/10.1016/j.cirp.2013.03.034  

23.   Eksioglu, C., Kilic, Z.M., Altintas, Y., 2012.“Discrete-time Prediction of Chatter Stability, Cutting Forces, and Surface Location Errors in Flexible Milling Systems”, ASME Journal of Manufacturing Science and Engineering, 134(6), p.061006. https://doi.org/10.1115/1.4007622  (Received ASME Blackall Best Journal Paper Award.)

24.   Kaymakci, M., Kilic, Z.M., Altintas, Y., 2012.“Unified Cutting Force Model for Turning, Boring, Drilling and Milling Operations”, International Journal of Machine Tools and Manufacture, 54-55, pp.34-45. https://doi.org/10.1016/j.ijmachtools.2011.12.008

 

Review journal papers:

1. Bilgin, M. and Kilic, Z.M., 2024.”Evaluation of Micro Milling of Magnesium Alloys in Biodegradable Implant Production”, Journal of Polytechnic (in Turkish), 1 – 1. https://doi.org/10.2339/politeknik.1466579

2. Mativenga, P.T., Schoop, J., Jawahir, I.S., Biermann, D., Kipp, M., Kilic, Z.M., Özel, T., Wertheim, R., Arrazola, P. and Boing, D., 2024.“Engineered design of cutting tool material, geometry, and coating for optimal performance and customized applications: A Review”, CIRP Journal of Manufacturing Science and Technology, vol. 52, pp.212-228. https://doi.org/10.1016/j.cirpj.2024.06.001

3. Alhijaily, A., Kilic, Z.M., Bartolo, P., 2023.“Teams of Robots in Additive Manufacturing: A Review”, Virtual and Physical Prototyping, 18(1), p.e2162929. https://doi.org/10.1080/17452759.2022.2162929  

4. Tartici, I.; Kilic, Z.M.; Bartolo, P., 2023.“A Systematic Literature Review: Industry 4.0 Based Monitoring and Control Systems in Additive Manufacturing”, Machines, 11, 712. https://doi.org/10.3390/machines11070712

5. Altintas, Y., Stepan, G., Budak, E., Schmitz, T. and Kilic, Z.M., 2020.“Chatter Stability of Machining Operations”, ASME Journal of Manufacturing Science and Engineering. 142(11), p.110801. https://doi.org/10.1115/1.4047391  

BOOK CHAPTERS

1. Kilic, Z.M., Milling Mechanics and Dynamics. 2024. In: Budak, E. (ed) A Closer Look at Milling Machines and Processes. Nova Publishers. ISBN: 979-8-89113-552-9. https://doi.org/10.52305/MWUU2566

2. Alhijaily, A., Kilic, Z.M., Bartolo, P. 2023. Localization and Control of a Mobile Robot for Additive Manufacturing, In: Correia Vasco, J.O., et al. Progress in Digital and Physical Manufacturing. ProDPM 2021. Springer Tracts in Additive Manufacturing. Springer, Cham. https://doi.org/10.1007/978-3-031-33890-8_7

3. Tartici, I., Kilic, Z.M., Da Silva Bartolo, P.J. 2023. Impact of Additive Manufacturing in SMEs, In: Chakrabarti, A., Suwas, S., Arora, M. (eds) Industry 4.0 and Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-0561-2_10

PEER-REVIEWED CONFERENCE PROCEEDINGS

1. Namlu, R.H., Kilic, Z.M., Lorraine, R., Kilic, S.E, 2023.“Investigation of the Effects of Axial Ultrasonic Vibrations on Chatter Stability in Milling with Bull Nose Cutters”, Procedia CIRP, 117, pp.199-204. https://doi.org/10.1016/j.procir.2023.03.035 (Presented in CIRP-CMMO2023 / 19th CIRP Conference on Modeling of Machining Operations.)

2. Malakizadi, A., Bertolini, R., Ducobu, F., Kilic, Z.M., Magnanini, M.C. and Shokrani, A., 2022. “Recent Advances in Modelling and Simulation of Surface Integrity in Machining–A Review”, Procedia CIRP, 115, pp.232-240. https://doi.org/10.1016/j.procir.2022.10.079 (Keynote paper of “CIRPe 2022: 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes”)

3. Parks, S., Kilic, Z.M. and Altintas, Y., 2019. “Modelling of Electron-beam Deflection System”, Proc. HI-AM 2nd 2019 Conference, Vancouver, BC, Canada.

4. Kilic, Z.M., Hermann, L., Atabey, F., 2017.“Design and implementation of a tool condition monitoring system for the shop floor”, 6th VMPT, Montréal, Canada.

5. Kilic, Z.M., Altintas, Y., Reynolds, B., 2016.“General machining process simulation software”, 17th UMTIK, Bursa, Turkey.

6. Kilic, Z.M., Altintas, Y., 2014.“The mechanics of double-sided milling operation”, 16th UMTIK, Izmir, Turkey.

7. Kilic, Z.M., Altintas, Y., 2012.“Stability of peripheral milling operations with long end mills”, Procedia CIRP, Vol.4, pp.103-108.

8. Eksioglu, C., Kilic, Z.M., Altintas, Y., 2012.“Peripheral milling of flexible structures”, 15th UMTIK, Denizli, Turkey.

9. Kilic, Z.M., Iglesias, A., Munoa, J., Altintas, Y., 2010.“Investigation of tool wear on the stability of milling process using an inverse method”, 2nd CIRP PMI, Vancouver, Canada.

10. Kilic, Z.M., Ozguven, H.N., Altintas, Y., 2010.“Effects of cubic nonlinearity of bearing on FRF and on stability of spindle-tool system”, 14th UMTIK, Guzelyurt, Northern Cyprus.

 

Thank you for your visit.